Showing posts with label 2011 Honda Brio. Show all posts
Showing posts with label 2011 Honda Brio. Show all posts
New Honda Brio Promotional Video
11 Brio,
12 Brio,
2011 Honda Brio,
2012 Honda Brio,
Car News,
Honda,
Honda Brio Video,
Honda China,
Honda Commercial,
Honda Malaysia
9:05 AM
New Honda Brio Promotional Video
11 Brio,
12 Brio,
2011 Honda Brio,
2012 Honda Brio,
Car News,
Honda,
Honda Brio Video,
Honda China,
Honda Commercial,
Honda Malaysia
9:05 AM
Spy Shots: 2011 Honda Brio
2011 Honda Brio,
Honda,
Honda Brio Spyshot,
Honda India,
Honda Malaysia,
Honda Thailand,
Next Gen Honda Compact
7:00 AM
Not for us here is North America....

Built with a 1.2L, 3-cylinder 900cc engine, Honda Brio looks a lot like Maruti Suzuki Alto, and Chevrolet's Beat. Honda was caught testing the stability of Brio in Thailand earlier this week. Honda test drivers were driving the car at high speeds of 120 kmph in order to check stability.
Honda Brio measures 3.6 m in length, 1.68 m in width and 1.475 m in height. It has a slightly elevated rear window line, but is void of VTEC - Variable Valve Timing and Electronic Control technology. Honda plans to launch Brio equipped with VTEC feature in 2012. Reports also suggest Honda would launch a sedan variant of Brio later.
Honda is expected to give Indians a sneak peak into Brio on 17th March, but Indian buyers will have to wait till September in order to get their hands on the new small car from Honda.


Honda Brio measures 3.6 m in length, 1.68 m in width and 1.475 m in height. It has a slightly elevated rear window line, but is void of VTEC - Variable Valve Timing and Electronic Control technology. Honda plans to launch Brio equipped with VTEC feature in 2012. Reports also suggest Honda would launch a sedan variant of Brio later.
Honda is expected to give Indians a sneak peak into Brio on 17th March, but Indian buyers will have to wait till September in order to get their hands on the new small car from Honda.
Above is what the vehicle looks like without camo....
Source;
Spy Shots: 2011 Honda Brio
2011 Honda Brio,
Honda,
Honda Brio Spyshot,
Honda India,
Honda Malaysia,
Honda Thailand,
Next Gen Honda Compact
7:00 AM
Not for us here is North America....

Built with a 1.2L, 3-cylinder 900cc engine, Honda Brio looks a lot like Maruti Suzuki Alto, and Chevrolet's Beat. Honda was caught testing the stability of Brio in Thailand earlier this week. Honda test drivers were driving the car at high speeds of 120 kmph in order to check stability.
Honda Brio measures 3.6 m in length, 1.68 m in width and 1.475 m in height. It has a slightly elevated rear window line, but is void of VTEC - Variable Valve Timing and Electronic Control technology. Honda plans to launch Brio equipped with VTEC feature in 2012. Reports also suggest Honda would launch a sedan variant of Brio later.
Honda is expected to give Indians a sneak peak into Brio on 17th March, but Indian buyers will have to wait till September in order to get their hands on the new small car from Honda.


Honda Brio measures 3.6 m in length, 1.68 m in width and 1.475 m in height. It has a slightly elevated rear window line, but is void of VTEC - Variable Valve Timing and Electronic Control technology. Honda plans to launch Brio equipped with VTEC feature in 2012. Reports also suggest Honda would launch a sedan variant of Brio later.
Honda is expected to give Indians a sneak peak into Brio on 17th March, but Indian buyers will have to wait till September in order to get their hands on the new small car from Honda.
Above is what the vehicle looks like without camo....
Source;
Paultan.org: Honda’s A-segment BRIO set for March 2011 production
Not for North America....




This is the Honda BRIO prototype, which is the near production version of the company’s New Small Concept that was shown earlier this year in India. It is an A-segment vehicle that’s one class smaller than the Jazz and City. Rivals will include the Suzuki Alto, Hyundai i10 and Kia Picanto, among other small cars.
The BRIO measures 3,610 mm long, 1,680 mm wide and 1,475 mm tall. That’s 45 mm longer, 85 mm wider, but 65 mm lower than a Hyundai i10. Honda did not reveal what the wheelbase is, or what engine powers the BRIO, though we’re guessing a 1.2L SOHC engine from the same family as the one in the Jazz/City. Honda needs it to achieve an average fuel consumption of less than 5 litres per 100 km (or 20 km/l) on the ECE R101 mode measurement cycle to meet Thai eco car requirements.
Thai production will begin in March 2011. India will start making the Brio in 2011 as well, with 80% local content. Although the BRIO was designed primarily for the Thai and Indian market, Honda is considering export from Thailand to the region around it, so there’s a possibility that Honda Malaysia could take up this model as an entry level to the range, something like “my first Honda”.
In Thailand, Honda targets to sell the BRIO at a starting price of approximately 400,000 baht, which is the same price as a Proton Savvy thanks to the tax breaks it gets from the Thai eco car plan, while in India the car is supposed to go 500,000 rupees onwards. How much will you pay for a BRIO in Malaysia?
Source;
http://paultan.org/2010/11/30/hondas-a-segment-brio-set-for-march-2011-production/





The BRIO measures 3,610 mm long, 1,680 mm wide and 1,475 mm tall. That’s 45 mm longer, 85 mm wider, but 65 mm lower than a Hyundai i10. Honda did not reveal what the wheelbase is, or what engine powers the BRIO, though we’re guessing a 1.2L SOHC engine from the same family as the one in the Jazz/City. Honda needs it to achieve an average fuel consumption of less than 5 litres per 100 km (or 20 km/l) on the ECE R101 mode measurement cycle to meet Thai eco car requirements.
Thai production will begin in March 2011. India will start making the Brio in 2011 as well, with 80% local content. Although the BRIO was designed primarily for the Thai and Indian market, Honda is considering export from Thailand to the region around it, so there’s a possibility that Honda Malaysia could take up this model as an entry level to the range, something like “my first Honda”.
In Thailand, Honda targets to sell the BRIO at a starting price of approximately 400,000 baht, which is the same price as a Proton Savvy thanks to the tax breaks it gets from the Thai eco car plan, while in India the car is supposed to go 500,000 rupees onwards. How much will you pay for a BRIO in Malaysia?
Source;
http://paultan.org/2010/11/30/hondas-a-segment-brio-set-for-march-2011-production/
Paultan.org: Honda’s A-segment BRIO set for March 2011 production
Not for North America....




This is the Honda BRIO prototype, which is the near production version of the company’s New Small Concept that was shown earlier this year in India. It is an A-segment vehicle that’s one class smaller than the Jazz and City. Rivals will include the Suzuki Alto, Hyundai i10 and Kia Picanto, among other small cars.
The BRIO measures 3,610 mm long, 1,680 mm wide and 1,475 mm tall. That’s 45 mm longer, 85 mm wider, but 65 mm lower than a Hyundai i10. Honda did not reveal what the wheelbase is, or what engine powers the BRIO, though we’re guessing a 1.2L SOHC engine from the same family as the one in the Jazz/City. Honda needs it to achieve an average fuel consumption of less than 5 litres per 100 km (or 20 km/l) on the ECE R101 mode measurement cycle to meet Thai eco car requirements.
Thai production will begin in March 2011. India will start making the Brio in 2011 as well, with 80% local content. Although the BRIO was designed primarily for the Thai and Indian market, Honda is considering export from Thailand to the region around it, so there’s a possibility that Honda Malaysia could take up this model as an entry level to the range, something like “my first Honda”.
In Thailand, Honda targets to sell the BRIO at a starting price of approximately 400,000 baht, which is the same price as a Proton Savvy thanks to the tax breaks it gets from the Thai eco car plan, while in India the car is supposed to go 500,000 rupees onwards. How much will you pay for a BRIO in Malaysia?
Source;
http://paultan.org/2010/11/30/hondas-a-segment-brio-set-for-march-2011-production/





The BRIO measures 3,610 mm long, 1,680 mm wide and 1,475 mm tall. That’s 45 mm longer, 85 mm wider, but 65 mm lower than a Hyundai i10. Honda did not reveal what the wheelbase is, or what engine powers the BRIO, though we’re guessing a 1.2L SOHC engine from the same family as the one in the Jazz/City. Honda needs it to achieve an average fuel consumption of less than 5 litres per 100 km (or 20 km/l) on the ECE R101 mode measurement cycle to meet Thai eco car requirements.
Thai production will begin in March 2011. India will start making the Brio in 2011 as well, with 80% local content. Although the BRIO was designed primarily for the Thai and Indian market, Honda is considering export from Thailand to the region around it, so there’s a possibility that Honda Malaysia could take up this model as an entry level to the range, something like “my first Honda”.
In Thailand, Honda targets to sell the BRIO at a starting price of approximately 400,000 baht, which is the same price as a Proton Savvy thanks to the tax breaks it gets from the Thai eco car plan, while in India the car is supposed to go 500,000 rupees onwards. How much will you pay for a BRIO in Malaysia?
Source;
http://paultan.org/2010/11/30/hondas-a-segment-brio-set-for-march-2011-production/
2011 Honda Brio City car Prototype Video
2011 Honda Brio,
Car News,
Honda,
Honda News,
Honda Prototype,
Honda Small Car Concept,
Honda Thailand,
New Honda Car
6:46 AM
Not for North America....
2011 Honda Brio City car Prototype Video
2011 Honda Brio,
Car News,
Honda,
Honda News,
Honda Prototype,
Honda Small Car Concept,
Honda Thailand,
New Honda Car
6:46 AM
Not for North America....
Subscribe to:
Posts (Atom)